Helpful Daf wastewater Treatment Dissolved Air Flotation Machine

Description:
       
        YW sequence Dissolved Air Flotation is largely for solid-liquid or liquid-liquid separation. Huge sum of micro bubbles made by dissolving and releasing technique adhere to strong or liquid particles with same density as waste h2o to make the complete float to the surface area as a result attain the intention of sound-liquid or liquid-liquid separation.

CZPT Parameter:
 

Product	Capability(m³/h)	Dissolved Fuel water(m³/h)	Major dynamo power(KW)	Foam scraper power(KW)	Air compressor electrical power(KW)	Dissolved air tank size(mm)	General dimension(mm)
YW-5	4-5	1.5-2	three	.fifty five	1.5	φ400×1000	3300×1800×2000
YW-ten	eight-ten	two-three	4	.55	one.5	φ500×1512	4000×2100×2200
YW-20	15-twenty	5-7	seven.5	.fifty five	1.five	φ500×1512	4600×2400×2200
YW-30	twenty-30	six-ten	seven.5	.fifty five	1.5	φ500×1512	5200×2600×2400
YW-forty	30-40	eight-13	seven.5	.seventy five	two.2	φ600×1880	6000×2600×2400
YW-fifty	40-fifty	15-20	seven.5	.75	2.two	φ600×1880	7000×2600×2400
YW-60	fifty-sixty	18-27	11	.seventy five	two.two	φ600×1880	7600×2800×2400
YW-70	60-70	22-30	11	.seventy five	2.2	φ650×2034	8400×2800×2400
YW-eighty	70-eighty	24-32	11	.seventy five	3	φ650×2034	9200×2800×2400
YW-one hundred and five	ninety-one zero five	30-35	fifteen	1.five	three	φ700×1980	10000×2800×2600
YW-one hundred fifty	one hundred twenty five-one hundred fifty	sixty-80	22	1.one	four	φ700×1980	13500×2800×2600
YW-two hundred	one hundred seventy five-200	80-100	30	one.1	five.5	φ800×2100	15800×2800×2600
YW-250	225-250	a hundred-120	37	one.1	five.five	φ800×2400	15200×3400×2600
YW-300	280-300	120-a hundred and eighty	37	one.1	5.5	φ1000×2900	19200×3400×2800

Construction:

        YW Dissolved Air system is composed of Air Dissolving Program(dissolved air pump,air compressor ,dossolved air tank, releaser etc.),air flotation tank, scraping technique(foam scraper reducer, chain,scraping board and so on).

Merchandise Efficiency:

1.The DAF device relies on a big quantity of micro-bubbles to eliminate the flocculation of  the adhesion reaction,so the flocculayion requirements are not substantial ,which can lessen the flocculation time and help save the flocculation agent.

two.Substantial generate for each device area,little pool capability and flooring area,saving land and value.

3.Practical sludge discharge ,low drinking water consumptionlow moisture material of sludge.

four.Shallow tank body depth ,simple tank framework .The machine can be opened and stopped at any time according to the circumstance and the real demands,CZPT affecting the water high quality ,straightforward operation and maintenance.

Apps:

1.Separation of oily(including emulsified) wastewater from petroleum, chemical and mechanical processes.

two.CZPTvery of sewage organic make a difference.(these kinds of as recovery of pulp fibers and fillers from paper mill wastewater).

3.Treatment of wastewater with high chroma and lower dissolved oxygen.This sort of as textile printing and dyeing wastewater remedy .

four.Treatment method of oxide-rich wastewater made up of algae.

five.Treatment method of low temperature and lower turbidity sewage.

six.Replace secondary sedimentation tank, suited for the circumstance that is easy to make sludge swellingIt is appropriate for the focus of residual activated sludge and handy for the treatment of filter push.

Recommendations:

1.Punning basis just before installation .Block up one hundred-150mm with concrete mortar or choose overhead installation ,make positive the basis can bear the weight of the products in operation.

2.The horizontal should be altered when the equipment is in position.

three.Sewer is needed for the discharge of drinking water in cleansing air floating pond.Open channel or pipeline connected to the regulating reservoir is okay.

four.The pipeline which links sewage entrance and reaction tank need to be limited (the shorter,the much better) in get to stay away from the damage of flocculants.

5.The clean drinking water entrance can be related with sewer ,or be connected with the following therapy tools if required.

six.Sludge exit can be connected with sludge tank or sludge remedy products.

7.CZPTal cupboard should be placed about the staircase,hold the atmosphere clean.

Transportation Package deal:

Business Introduction:

FAQ:

one.Q:Are you a manufacturing facility or buying and selling firm?
   A:We are a factory  ,we have rich knowledge for manufacuring drinking water processing products for    far more than 10 several years.

2.Q:In which is your factory positioned? How can I go to there?
   A:Our manufacturing facility is positioned in No.1137,HangCZPT city ,ZheJiang Province, China .It is about 2 hours  from HangCZPT airport, HangCZPT teach station and Wei fang train station. We can decide you up if you  need ,welcome to pay a visit to our manufacturing facility.

3.Q:Do you have minimum order quantity request?  
   A:No least purchase, but it can get a price cut if you purchase a massive quantity.

four.Q:Do you have certificates?
   A:Yes,we have ISO,SGS certificate.

5.Q:Can you satisfy my unique require mwnts for my goods?
    A:Yes,we have a skilled layout staff.We can provide drawings in accordance to your                demands.

6.Q:How to get your thought merchandise?
   A:You can offer us your water or waste sources,drinking water or squander good quality,movement price and ground    spot (join us for more specifics) .

seven.Q:How to pay out?
   A:T/T and L/C are acceptable and T/T will be a lot more appreciated 30% deposit before                         producing,70% harmony before loading by T/T.

eight.Q:What is the shipping and delivery time ?
   A: It depends on get quantitles .CZPTly speaking ,the delivery time will be within 4 to 6 weeks.

9.Q:How to pack the products?
   A:We use normal package .If you have special package deal requirements ,we will pack as required ,but the expenses will be paid by consumers.

ten.Q:How to keep your equipments from corrosion?
     A:We use the globe-well-known paint ,like Sigma Coatings ,Pain ,Bow, etc. What’s more ,we paint strictly according to the normal procedure.

11.Q:How do you manufacture your gear?
     A:Our machining technology includes laser one plasma cutting ,computerized welding, CNC chopping and bending.

12.Q:How to install soon after the equipments arriving destination?
     A:We will give thorough illustrations to you. If it is needed, we will deliver specialists to assist you. However, the visa fee ,air tickets ,accommodation, wages  will be paid by buyers.