Product Description
A, B series roller chain
SPECIFICATION:
1)A series chains:
A. Simplex: 25-1~240-1
B. Duplex: 25-2~240-2
C. Triplex: 25-3~240-3
D. Quadruplex: 40-4~240-4
E. Quintuple: 40-5~240-5
F. Sextuple: 40-6~240-6
G. Octuple: 40-8~240-8
2)B series chains:
A. Simplex: 04B-1~48B-1
B. Duplex: 04B-2~48B-2
C. Triplex: 06B-3~48B-3
D. Quadruplex: 08B-4~48B-4
E. Quintuple: 08B-5~48B-5
F. Sextuple: 08B-6~48B-6
G. Octuple: 08B-8~48B-8
3)Colors available: Natural, yellow, blue, black
4)Materiials: Carbon steel, stainless steel
| Usage: | Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain |
|---|---|
| Material: | Alloy |
| Surface Treatment: | Polishing |
| Feature: | Heat Resistant |
| Chain Size: | 1/2"*11/128" |
| Structure: | Roller Chain |
| Samples: |
US$ 0/Meter
1 Meter(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can paver chains be used in parking lot construction and surfacing?
Yes, paver chains can be used in parking lot construction and surfacing projects. Parking lots are among the various types of surfaces where asphalt paving is commonly employed, and paver chains play a critical role in achieving smooth and well-leveled pavements. Here’s how paver chains are utilized in parking lot construction:
1. Material Distribution: Paver chains evenly distribute the asphalt mix across the width of the parking lot, ensuring consistent material depth throughout the surface. This even distribution helps in achieving a uniform and level parking lot surface.
2. Precise Control: Paver chains enable precise control over the material depth during the paving process. The speed and tension of the chain can be adjusted to control the flow rate of the asphalt mix, ensuring the desired thickness for the parking lot surface.
3. Smooth Paving: By providing accurate and controlled material distribution, paver chains help in creating a smooth and well-compacted parking lot surface. This is essential for ensuring a level surface that allows for safe and comfortable vehicle movement.
4. Efficient Construction: The use of paver chains in parking lot construction allows for efficient and timely completion of the project. The consistent material depth achieved by the chains reduces the need for rework, leading to faster construction and minimized downtime.
5. Versatility: Paver chains can be used in different types of asphalt pavers, making them suitable for a wide range of parking lot sizes and designs. Whether it’s a small parking lot for a commercial establishment or a large parking area for an industrial complex, paver chains can handle the paving requirements efficiently.
6. Longevity: High-quality paver chains made from durable materials are designed to withstand the rigors of continuous paving operations. This ensures their longevity and reliability even in demanding parking lot construction projects.
Parking lot construction and surfacing projects benefit from the use of paver chains, as they contribute to the quality, efficiency, and durability of the pavement. Whether it’s a new parking lot construction or resurfacing an existing one, paver chains play a crucial role in delivering a well-built and long-lasting parking lot surface.
What are the safety features and precautions associated with paver chain usage?
Paver chain usage involves specific safety considerations to ensure the well-being of operators and workers on construction sites. Here are some key safety features and precautions associated with using paver chains:
1. Safety Guards: Paver chains are often equipped with safety guards or covers to enclose the moving parts and prevent accidental contact. These guards help minimize the risk of entanglement or injury to personnel working around the chain assembly.
2. Lockout/Tagout Procedures: Lockout/tagout procedures are essential to prevent accidental startups or energization of the paver chain during maintenance or repair work. Properly implemented lockout/tagout protocols ensure that the equipment is de-energized and cannot be operated until the work is completed and all personnel are clear of the area.
3. Operator Training: Adequate training for equipment operators is crucial to ensure safe and proper use of paver chains. Operators should be familiar with the equipment’s operation, safety features, and emergency shutdown procedures to handle potential issues effectively.
4. Personal Protective Equipment (PPE): Workers and operators should wear appropriate personal protective equipment, such as high-visibility clothing, hard hats, safety glasses, steel-toed boots, and hearing protection, to reduce the risk of injury from potential hazards on construction sites.
5. Proper Maintenance: Regular maintenance of paver chains is necessary to keep them in safe working condition. Inspections should be conducted to identify and address any wear, damage, or malfunction that could compromise safety.
6. Load Capacity and Limits: Paver chains have specific load capacity limits, and exceeding these limits can lead to failures and accidents. It’s essential to use chains with appropriate load ratings for the paving application and ensure proper load distribution during operation.
7. Adequate Lighting: Adequate lighting around the paver chain area helps improve visibility and reduces the risk of accidents, especially during low-light conditions or night work.
8. Emergency Stop Mechanism: Paver chains should be equipped with an easily accessible emergency stop mechanism that allows operators to halt the chain’s movement immediately in case of an emergency or potential hazard.
9. Safe Work Zones: Establishing clear and designated work zones around the paver chain area is crucial to prevent unauthorized personnel from entering potentially hazardous areas.
10. Risk Assessment: Before starting any paving operation, a comprehensive risk assessment should be conducted to identify potential hazards and implement appropriate safety measures to mitigate risks.
By adhering to these safety features and precautions, construction crews can work safely and efficiently with paver chains, minimizing the risk of accidents and injuries on the job site.
Can paver chains be repaired or replaced if they become damaged?
Yes, paver chains can be repaired or replaced if they become damaged. The approach taken will depend on the extent of the damage and the condition of the chain. Here’s a more detailed explanation:
1. Repair: In some cases, minor damage to the paver chain can be repaired. This may involve fixing or replacing individual links, fixing bent components, or addressing issues with chain joints. Repairs should be carried out by trained professionals familiar with paver chain maintenance to ensure the chain’s structural integrity and performance are not compromised.
2. Replacement of Components: If only certain components of the paver chain are damaged, such as the links or pins, these specific parts can be replaced without replacing the entire chain. Again, this requires expertise to ensure that the replacement components match the original specifications of the chain.
3. Full Replacement: In cases of severe damage or extensive wear, a full replacement of the paver chain might be necessary. Over time, paver chains may experience wear and elongation due to the demanding nature of asphalt paving operations. Once a chain has reached its wear limit or is significantly elongated, replacement becomes the most viable option. New, properly sized chains will restore the paver’s optimal performance and ensure a uniform asphalt laying process.
4. Preventive Maintenance: Regular inspection and preventive maintenance can help identify potential issues with the paver chain before they become severe. This can extend the chain’s lifespan and minimize the need for major repairs or replacements.
5. Proper Lubrication: Proper lubrication is crucial for reducing wear and extending the life of the paver chain. Regularly lubricating the chain according to the manufacturer’s recommendations can prevent premature damage and increase its durability.
6. Timely Replacement: It’s essential to replace a damaged paver chain promptly to avoid further issues and prevent potential downtime during paving operations. Delaying replacement could lead to more extensive damage or cause complications in the asphalt laying process.
Ultimately, the decision to repair or replace a damaged paver chain depends on the assessment of a qualified technician and the specific circumstances of the chain’s condition. Regular maintenance and timely action will help ensure the paver chain’s reliability and longevity, minimizing disruptions during construction projects.
editor by CX 2023-11-20
China OEM Plastic Coated CZPT Alloy Chain Load Lifting Chain custom roller chain
Product Description
Plastic Coated CZPT Alloy Chain Load Lifting Chain
| Product Name | Plastic Coated CZPT Alloy Chain Load Lifting Chain |
| Surface Treatment | Plastic coated |
| Material | 20Mn2;25MnV |
| Size | 6mm-32mm |
| Delivery Time | Shipped In 30 Days after Payment |
| Package | Iron Drum;Plastic Pail OR as requirement |
| Port | ZheJiang /HangZhou OR as requirement |
| Experience | More than 20 years in this area |
Porcess
About us
HangZhou Link Metal Products Co., Ltd is a specialized manufacture of various kinds of steel link chains.It was established in 1996 with total area of 30000m2. Currently there are more than 200 employees.The factory has a professional technician team for nearly 20 years chain industry working experience.The products mainly fall into 3 parts,one is high tensile chains from
6mm to 30mm,another is stainless steel chains from 1.5mm to 50mm,the other is commercial chain from 1.5mm to 30mm.These products are widely used in lifting,coal mining,fishing,shipping and so on.Besides,we can produce any nonstandard link chains according toclient’s
requirements and drawings.
Our corporation always insist quality first,customer supreme, keep the principle of honesty and trustworthy and maintain the spirit of constant innovation.
General Manager and all stuff sincerely welcome all the customers at home and abroad to visit our factory and establish long term business relationship.
FAQ
Q: Are you a trading company or manufacture?
A: We are a real manufacture which specialized in link chain for around 20years and steel wire
rope for 10 years. Also, we have an independent trading company to deal with business of
rigging and related hardware.
Q: How do you control quality?
A: Selection of high-quality raw material.
Strict production procedure according to standard.ISO quality management system certified.
Q. Where is your factory located?
A: It’s located in Chahe Industrial Zone, Xihu (West Lake) Dis., ZheJiang province, China, which is close to
ZheJiang .Welcome to visit us!
Q. What’s your delivery time for a full container?
A: 30-40days is needed to ship out a full container.
Q: Does free samples available?
A: Yes, several links of chains can be provided for free but you need to cover the express
charge(DHL,UPS, FEDEX, TNT, EMS)
Any inquiry please feel free to contact me.
| Usage: | Drag Chain |
|---|---|
| Material: | Alloy |
| Surface Treatment: | Plastic Coating |
| Feature: | Heat Resistant |
| Chain Size: | 6mm-34mm |
| Structure: | Welded Chain |
| Customization: |
Available
| Customized Request |
|---|
What is a roller chain?
What is a roller chain? A roller chain is a transmission system that transmits power from one shaft to another. Internal lubricant helps chains last longer and are interchangeable. Chains are usually made of carbon or alloy steel. Stainless steel is sometimes used in food processing machinery or in environments where lubrication is problematic. Brass and nylon are also sometimes used. If you need to slow down the machine, nylon chains can be used.
Roller chains are used to transmit power from one shaft to another
Generally speaking, the life of a roller chain is limited by three main factors: wear, corrosion, and fatigue. These can be minimized by following some simple guidelines. For optimum performance, the roller chain must be lubricated. Proper lubrication reduces friction and extends product life. Remember that corrosion and wind resistance can adversely affect lubrication, so protect the product properly.
A chain is a mechanical device used to transmit power from one shaft to another. The chain consists of a series of steel plates called bushings. Bushings are attached to the roller chain by pins or bushings. The block and bushing are held together by pins or bushings C riveted to the outer link D. The chain is also attached to the sprocket and bucket by pins or hooks. Chain pitch is measured between hinge centers, usually denoted p.
There are three types of chains: single-strand standard series, multi-strand standard series, and silent chain. Single strand chains are the most common type and cover a wide range of drive loads. Multi-strand chains provide greater power capacity without increasing chain pitch or line speed. An inverted tooth chain is a variant of a single-strand chain that eliminates the noise caused by pitch-related friction.
The inner and outer plates of the roller chain drive are made of steel. The rollers are positioned evenly between the chain links and are fastened to the sprockets. In addition, the rollers can rotate freely within the bushing. The chain links are arc-shaped and mesh with the sprocket teeth to transmit power through the chain.
Chain drives are another common way of transmitting mechanical power. These are the simplest forms of power transmission and are used on conveyor belts and other low-speed applications. The chain wraps around the sprocket and passes through the sprocket whose teeth mesh with the links. This mechanism transfers mechanical power from one shaft to another, increasing speed.
They are interchangeable
There are many different types of roller chains, but most are made of steel. Although they have their own advantages and features, they are generally interchangeable. You can buy different kinds of roller chains from domestic and foreign manufacturers, and you can choose the one that best suits your needs. Bearing Services can help you choose the right bearing for your application needs and budget. Here are some important things to consider before buying a roller chain. Here are some tips to make it easier for you to buy the right type of chain.
When choosing the right roller chain, be sure to consult the available size charts. Depends on how much chain you need to move the load you need to move. Remember that roller chains can be manufactured to fit a variety of machines and must meet your specific needs. Also, the chain should be long enough for the machine you are using. Make sure to buy a chain made of high-quality materials.
Double pitch roller chains have a flat top surface and are used in many different conveying applications. Double-pitch load-carrying roller chains, also known as oversized roller double-pitch chains, have rollers that extend beyond the sidebars to carry products. Double pitch drive series roller chains are used in elevators, long conveyor drives, agricultural machinery, and commercial sprinkler systems.
The tensile strength of a roller chain is a key factor to consider before purchasing a chain. The tensile strength of a chain is a function of the maximum force the chain can withstand before breaking. The three different types of tensile strength represent the force a chain can withstand without breaking. Each chain also has different strengths that can determine the type of chain you need.
The outer and inner links of the roller chain are designed for bearings. This allows the chain to be paired or unpaired with its internal links. The outer link has a pin, and the inner and outer pins are press-fit into the connecting plate. These links are usually made of steel and have a tensile strength of about 20 times their weight. The fatigue strength of two-pitch offset links is the same as that of the base chain.
They reduce wear with internal lubricants
In a roller chain, the pins and bushings rotate inside the chain without lubricant on the outside. They are in contact with the teeth of the sprocket and can easily wear out if not lubricated. The plates that connect the links and pivot about the pins can also rub against each other and cause wear. This is where lubricants come in handy. Without lubricant, the bare metal of the plate and bushing would rub against each other.
The lubricant should have the appropriate viscosity to penetrate critical internal surfaces and form an effective oil film. Recommended viscosities are listed in Table 1. Lubricants must be clean and non-corrosive. For roller chains, a good quality non-clean petroleum base oil is sufficient. While defoamers are not required, other additives such as antioxidants and extreme pressure inhibitors may be useful. However, impure oils should be avoided due to the risk of damage.
The shape of the spray head 10 overlaps with a conventional drive chain 12. The drive chain includes a plurality of rollers 24 and roller link plates 26. Each roller includes a roller pin 29 and is connected to a pair of pin link plates 28. Most drive chains have critical wear points on the sides of the roller pins 29. The shape of the spray head 10 prevents overspray onto the central portion of the roller.
In addition to preventing wear, these chains have unique specifications. Manufacturer CZPT requires raw material suppliers to certify that their products meet standards set by the American Society of Mechanical Engineers (ASME). CZPTs do not accept uncertified raw materials. For safety, the machine must be turned off before attempting to measure the chain. After the system is shut down, the measurement process should be completed in accordance with safety procedures.
General spray oil has lubricating properties, but is not as good as other types of chain lubricants. These are typically used for rust protection and include antioxidant chemicals. Generally, they are inexpensive and widely available in retail stores. However, they have the disadvantage of being very penetrating and difficult to apply evenly. Oil cannot stay on the chain as it spins, which can accelerate wear and corrosion.
They can be used to speed up or slow down machines
Typically, roller chains are chains used to move mechanical system components. Unlike belts, roller chains can be used to speed up or slow down a machine. The main difference between belts and roller chains is the lubrication process. Belts use lubrication to help them move at a constant speed, but should not exceed the critical speed of the roller chain. This critical speed is not easy to determine and lubrication is critical to its life.
A roller chain is a chain consisting of a steel bushing that holds the inner plate A and pins C together. Pin C is riveted to outer link D, while roller R surrounds each bushing B. The teeth of the sprocket are supported on the rollers. They spin freely on pins and bushings, reducing friction.
The chains can be single-stranded, double-stranded, or multi-stranded. The rated power capacity of the single strand chain can meet various drive load requirements. Multi-strand chains provide higher power capacity without increasing chain pitch or line speed. The silent chain, also known as the inverted tooth chain, consists of a series of toothed chainplates. The pins of the chain are pressed into the wide ends of the sidebars and outer links.
Although roller chains are a common mechanical component, they can fail under certain conditions. The most common cause of excessive wear is wrong to load sizing. Each manufacturer sets a maximum workload for its product. A chain that is too small for the load carried will not run smoothly and may cause premature failure. Chains can also fail due to rust or improper maintenance.
There are many ways to choose the correct size roller chain. The easiest way to choose the right one is to use a horsepower chart to determine the speed of the motor. RPM will determine the size of the chain and the number of teeth on the drive sprocket. Conveyor chains offer a variety of options to move products horizontally or vertically, even around bend radii.
editor by CX 2023-04-24
China best 18mm X 37mm Black Plastic Semi Closed Cable Drag Chain Wire Carrier 1m Length duplex roller chain
Product Description
Cable carrier
Material: reinforced nylon
Beautiful appearance , natural
Wear-resiatance , silent
Cable carrier –production Details
Cable carrier-Product parameters
The structure is more stable , the installatio is firmer. the precision mould is processed and formed, the towing chain is firmer , the service life is longer .
Process flow diagram-position indicator
–01 The raw material
–02production
–03 Assembly
–Packaging
Product quality comes from manufacturing capabilities
01 Factory Strength
The factory and office area is about 6000 square CZPT , the number of emplees is more than 100, and the imported ZheJiang , Japan , Hong Kong and other equipments reach more than 50pcs . Our company has stable inventory and can meet the needs of customers’ wholesale .
02 R&D STRENGTH
HangZhou CZPT MACHINERY CO., LTD. has dozens of mature R&D and design teams . Our mold design is updated quickly , keeping 1 to 2 new products every month and leading the market with new trends.
03>CUSTOMIZATION STRENGTH
HangZhou CZPT Machinery Co., Ltd. continuously develops new processes, introduces new technologies, designs and customizes various personalized accessories for customers, and all customized products in our company are guaranteed to be shipped within 1 month and customized cycle Guaranteed.
04 AFTER SALES STRENGTH
Dedicated customers are available 24 hours a day ,always andwer questions for customers, and provide service customers at the first time.
Packaging:
We use the carton to pack our productions.
Shipping:
Upon receipt of payment , delivery date will be in 3-5days,
By Air, by Sea or by Express (DHL etc)
Shipment cost will depend on the destination, shipment way and the weight of the goods
Our Service:
Quality
We will not compromise on the quality of our services.
We will deliver more than you expect.
Honesty and Integrity
The foundation of our success is the honesty and integrity in which we work with customers.
Communication
We are professional manufacturer, and your needs will be understand well.
We = Factory price + trading company service
We listen.
We Understand Marketing
Our methods are proven to be successful.
Our drive keeps ahead shows.
Established Business
It is more than 10 years since we start the oversea business, our machinery parts and service have been approved and satisfied by foreign clients over 30 countries.
We have survived the best and the worst of the economy while continuing to grow every year.
Constantly Evolving
Our dedicated team is constantly researching new and upcoming technologies that enable us to run our business more efficiently.
After sales service
1. Guaranty: 1 Years.
2. Any questions, you can mail/call us at any time. And our most experienced engineers are assigned to give consulting service, and always available for dispatching abroad.
3. Before delivering the product. , Our quality personnel will check the quality of our products
4. Our production catalogue is in English.
Why Choose Us?
1.We are 1 of the biggest manufacturers on machines parts in China
2.We have more than 10years experience on manufacturing and exporting.
3.We have the excellent quality control.
4.We have the competitive price.
5.We have the completed sales and service team so that we can offer the best service
For more details, please contact us freely.
Alice niu
Best Regards
HangZhou CZPT MACHINERY CO., LTD.
ADD:No.7,XIHU (WEST LAKE) DIS. ROAD, LUNJIAO TOWN , XIHU (WEST LAKE) DIS. DISTRICT , HangZhou CITY ,ZheJiang PROVINCE ,CHINA
| Customized: | Customized |
|---|---|
| Certification: | CE |
| Structure: | No Deformation |
| Colour: | Black |
| Bending Radius: | R48 |
| Performance: | Solid Structure |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What is a roller chain?
What is a roller chain? A roller chain is a transmission system that transmits power from one shaft to another. Internal lubricant helps chains last longer and are interchangeable. Chains are usually made of carbon or alloy steel. Stainless steel is sometimes used in food processing machinery or in environments where lubrication is problematic. Brass and nylon are also sometimes used. If you need to slow down the machine, nylon chains can be used.
Roller chains are used to transmit power from one shaft to another
Generally speaking, the life of a roller chain is limited by three main factors: wear, corrosion, and fatigue. These can be minimized by following some simple guidelines. For optimum performance, the roller chain must be lubricated. Proper lubrication reduces friction and extends product life. Remember that corrosion and wind resistance can adversely affect lubrication, so protect the product properly.
A chain is a mechanical device used to transmit power from one shaft to another. The chain consists of a series of steel plates called bushings. Bushings are attached to the roller chain by pins or bushings. The block and bushing are held together by pins or bushings C riveted to the outer link D. The chain is also attached to the sprocket and bucket by pins or hooks. Chain pitch is measured between hinge centers, usually denoted p.
There are three types of chains: single-strand standard series, multi-strand standard series, and silent chain. Single strand chains are the most common type and cover a wide range of drive loads. Multi-strand chains provide greater power capacity without increasing chain pitch or line speed. An inverted tooth chain is a variant of a single-strand chain that eliminates the noise caused by pitch-related friction.
The inner and outer plates of the roller chain drive are made of steel. The rollers are positioned evenly between the chain links and are fastened to the sprockets. In addition, the rollers can rotate freely within the bushing. The chain links are arc-shaped and mesh with the sprocket teeth to transmit power through the chain.
Chain drives are another common way of transmitting mechanical power. These are the simplest forms of power transmission and are used on conveyor belts and other low-speed applications. The chain wraps around the sprocket and passes through the sprocket whose teeth mesh with the links. This mechanism transfers mechanical power from one shaft to another, increasing speed.
They are interchangeable
There are many different types of roller chains, but most are made of steel. Although they have their own advantages and features, they are generally interchangeable. You can buy different kinds of roller chains from domestic and foreign manufacturers, and you can choose the one that best suits your needs. Bearing Services can help you choose the right bearing for your application needs and budget. Here are some important things to consider before buying a roller chain. Here are some tips to make it easier for you to buy the right type of chain.
When choosing the right roller chain, be sure to consult the available size charts. Depends on how much chain you need to move the load you need to move. Remember that roller chains can be manufactured to fit a variety of machines and must meet your specific needs. Also, the chain should be long enough for the machine you are using. Make sure to buy a chain made of high-quality materials.
Double pitch roller chains have a flat top surface and are used in many different conveying applications. Double-pitch load-carrying roller chains, also known as oversized roller double-pitch chains, have rollers that extend beyond the sidebars to carry products. Double pitch drive series roller chains are used in elevators, long conveyor drives, agricultural machinery, and commercial sprinkler systems.
The tensile strength of a roller chain is a key factor to consider before purchasing a chain. The tensile strength of a chain is a function of the maximum force the chain can withstand before breaking. The three different types of tensile strength represent the force a chain can withstand without breaking. Each chain also has different strengths that can determine the type of chain you need.
The outer and inner links of the roller chain are designed for bearings. This allows the chain to be paired or unpaired with its internal links. The outer link has a pin, and the inner and outer pins are press-fit into the connecting plate. These links are usually made of steel and have a tensile strength of about 20 times their weight. The fatigue strength of two-pitch offset links is the same as that of the base chain.
They reduce wear with internal lubricants
In a roller chain, the pins and bushings rotate inside the chain without lubricant on the outside. They are in contact with the teeth of the sprocket and can easily wear out if not lubricated. The plates that connect the links and pivot about the pins can also rub against each other and cause wear. This is where lubricants come in handy. Without lubricant, the bare metal of the plate and bushing would rub against each other.
The lubricant should have the appropriate viscosity to penetrate critical internal surfaces and form an effective oil film. Recommended viscosities are listed in Table 1. Lubricants must be clean and non-corrosive. For roller chains, a good quality non-clean petroleum base oil is sufficient. While defoamers are not required, other additives such as antioxidants and extreme pressure inhibitors may be useful. However, impure oils should be avoided due to the risk of damage.
The shape of the spray head 10 overlaps with a conventional drive chain 12. The drive chain includes a plurality of rollers 24 and roller link plates 26. Each roller includes a roller pin 29 and is connected to a pair of pin link plates 28. Most drive chains have critical wear points on the sides of the roller pins 29. The shape of the spray head 10 prevents overspray onto the central portion of the roller.
In addition to preventing wear, these chains have unique specifications. Manufacturer CZPT requires raw material suppliers to certify that their products meet standards set by the American Society of Mechanical Engineers (ASME). CZPTs do not accept uncertified raw materials. For safety, the machine must be turned off before attempting to measure the chain. After the system is shut down, the measurement process should be completed in accordance with safety procedures.
General spray oil has lubricating properties, but is not as good as other types of chain lubricants. These are typically used for rust protection and include antioxidant chemicals. Generally, they are inexpensive and widely available in retail stores. However, they have the disadvantage of being very penetrating and difficult to apply evenly. Oil cannot stay on the chain as it spins, which can accelerate wear and corrosion.
They can be used to speed up or slow down machines
Typically, roller chains are chains used to move mechanical system components. Unlike belts, roller chains can be used to speed up or slow down a machine. The main difference between belts and roller chains is the lubrication process. Belts use lubrication to help them move at a constant speed, but should not exceed the critical speed of the roller chain. This critical speed is not easy to determine and lubrication is critical to its life.
A roller chain is a chain consisting of a steel bushing that holds the inner plate A and pins C together. Pin C is riveted to outer link D, while roller R surrounds each bushing B. The teeth of the sprocket are supported on the rollers. They spin freely on pins and bushings, reducing friction.
The chains can be single-stranded, double-stranded, or multi-stranded. The rated power capacity of the single strand chain can meet various drive load requirements. Multi-strand chains provide higher power capacity without increasing chain pitch or line speed. The silent chain, also known as the inverted tooth chain, consists of a series of toothed chainplates. The pins of the chain are pressed into the wide ends of the sidebars and outer links.
Although roller chains are a common mechanical component, they can fail under certain conditions. The most common cause of excessive wear is wrong to load sizing. Each manufacturer sets a maximum workload for its product. A chain that is too small for the load carried will not run smoothly and may cause premature failure. Chains can also fail due to rust or improper maintenance.
There are many ways to choose the correct size roller chain. The easiest way to choose the right one is to use a horsepower chart to determine the speed of the motor. RPM will determine the size of the chain and the number of teeth on the drive sprocket. Conveyor chains offer a variety of options to move products horizontally or vertically, even around bend radii.
editor by CX 2023-04-23
China Plastic Flexible Chain for Food and Beverage (82.6-C) roller chain breaking tool
Product Description
Plastic Chain Conveyor Belt(eighty two.6-C)
Drawing
| Title | 82.6-C |
| Brand Title | LL |
| Biz Sort | Manufacturer/Factory |
| Pitch | 33.5mm/1.5” |
| Weight | 1.16KG/M |
| Max Size of conveyor | 15 Meters |
| Coloration | Blue White |
| Belt materials | POM |
| Function Temp | -40°c ~+90°c |
| Attribute | Heat Resistant |
| Guarantee | 6 months warranty |
Other Item
Packaging
Factory
Exhibitions
| Material: | Plastic |
|---|---|
| Inside Material: | POM |
| Feature: | Heat-Resistant, Cold-Resistant |
| Business Type: | Manufacturer |
| Pitch: | 33.5mm |
| Pin: | Stainless Steel |
###
| Customization: |
Available
|
|---|
###
| Name | 82.6-C |
| Brand Name | LL |
| Biz Type | Manufacturer/Factory |
| Pitch | 33.5mm/1.5” |
| Weight | 1.16KG/M |
| Max Length of conveyor | 15 Meters |
| Color | Blue White |
| Belt material | POM |
| Work Temp | -40°c ~+90°c |
| Feature | Heat Resistant |
| Warranty | 6 months warranty |
| Material: | Plastic |
|---|---|
| Inside Material: | POM |
| Feature: | Heat-Resistant, Cold-Resistant |
| Business Type: | Manufacturer |
| Pitch: | 33.5mm |
| Pin: | Stainless Steel |
###
| Customization: |
Available
|
|---|
###
| Name | 82.6-C |
| Brand Name | LL |
| Biz Type | Manufacturer/Factory |
| Pitch | 33.5mm/1.5” |
| Weight | 1.16KG/M |
| Max Length of conveyor | 15 Meters |
| Color | Blue White |
| Belt material | POM |
| Work Temp | -40°c ~+90°c |
| Feature | Heat Resistant |
| Warranty | 6 months warranty |
What is a roller chain?
What is a roller chain? A roller chain is a transmission system that transmits power from one shaft to another. Internal lubricant helps chains last longer and are interchangeable. Chains are usually made of carbon or alloy steel. Stainless steel is sometimes used in food processing machinery or in environments where lubrication is problematic. Brass and nylon are also sometimes used. If you need to slow down the machine, nylon chains can be used.
Roller chains are used to transmit power from one shaft to another
Generally speaking, the life of a roller chain is limited by three main factors: wear, corrosion, and fatigue. These can be minimized by following some simple guidelines. For optimum performance, the roller chain must be lubricated. Proper lubrication reduces friction and extends product life. Remember that corrosion and wind resistance can adversely affect lubrication, so protect the product properly.
A chain is a mechanical device used to transmit power from one shaft to another. The chain consists of a series of steel plates called bushings. Bushings are attached to the roller chain by pins or bushings. The block and bushing are held together by pins or bushings C riveted to the outer link D. The chain is also attached to the sprocket and bucket by pins or hooks. Chain pitch is measured between hinge centers, usually denoted p.
There are three types of chains: single-strand standard series, multi-strand standard series, and silent chain. Single strand chains are the most common type and cover a wide range of drive loads. Multi-strand chains provide greater power capacity without increasing chain pitch or line speed. An inverted tooth chain is a variant of a single-strand chain that eliminates the noise caused by pitch-related friction.
The inner and outer plates of the roller chain drive are made of steel. The rollers are positioned evenly between the chain links and are fastened to the sprockets. In addition, the rollers can rotate freely within the bushing. The chain links are arc-shaped and mesh with the sprocket teeth to transmit power through the chain.
Chain drives are another common way of transmitting mechanical power. These are the simplest forms of power transmission and are used on conveyor belts and other low-speed applications. The chain wraps around the sprocket and passes through the sprocket whose teeth mesh with the links. This mechanism transfers mechanical power from one shaft to another, increasing speed.
They are interchangeable
There are many different types of roller chains, but most are made of steel. Although they have their own advantages and features, they are generally interchangeable. You can buy different kinds of roller chains from domestic and foreign manufacturers, and you can choose the one that best suits your needs. Bearing Services can help you choose the right bearing for your application needs and budget. Here are some important things to consider before buying a roller chain. Here are some tips to make it easier for you to buy the right type of chain.
When choosing the right roller chain, be sure to consult the available size charts. Depends on how much chain you need to move the load you need to move. Remember that roller chains can be manufactured to fit a variety of machines and must meet your specific needs. Also, the chain should be long enough for the machine you are using. Make sure to buy a chain made of high-quality materials.
Double pitch roller chains have a flat top surface and are used in many different conveying applications. Double-pitch load-carrying roller chains, also known as oversized roller double-pitch chains, have rollers that extend beyond the sidebars to carry products. Double pitch drive series roller chains are used in elevators, long conveyor drives, agricultural machinery, and commercial sprinkler systems.
The tensile strength of a roller chain is a key factor to consider before purchasing a chain. The tensile strength of a chain is a function of the maximum force the chain can withstand before breaking. The three different types of tensile strength represent the force a chain can withstand without breaking. Each chain also has different strengths that can determine the type of chain you need.
The outer and inner links of the roller chain are designed for bearings. This allows the chain to be paired or unpaired with its internal links. The outer link has a pin, and the inner and outer pins are press-fit into the connecting plate. These links are usually made of steel and have a tensile strength of about 20 times their weight. The fatigue strength of two-pitch offset links is the same as that of the base chain.
They reduce wear with internal lubricants
In a roller chain, the pins and bushings rotate inside the chain without lubricant on the outside. They are in contact with the teeth of the sprocket and can easily wear out if not lubricated. The plates that connect the links and pivot about the pins can also rub against each other and cause wear. This is where lubricants come in handy. Without lubricant, the bare metal of the plate and bushing would rub against each other.
The lubricant should have the appropriate viscosity to penetrate critical internal surfaces and form an effective oil film. Recommended viscosities are listed in Table 1. Lubricants must be clean and non-corrosive. For roller chains, a good quality non-clean petroleum base oil is sufficient. While defoamers are not required, other additives such as antioxidants and extreme pressure inhibitors may be useful. However, impure oils should be avoided due to the risk of damage.
The shape of the spray head 10 overlaps with a conventional drive chain 12. The drive chain includes a plurality of rollers 24 and roller link plates 26. Each roller includes a roller pin 29 and is connected to a pair of pin link plates 28. Most drive chains have critical wear points on the sides of the roller pins 29. The shape of the spray head 10 prevents overspray onto the central portion of the roller.
In addition to preventing wear, these chains have unique specifications. Manufacturer CZPT requires raw material suppliers to certify that their products meet standards set by the American Society of Mechanical Engineers (ASME). CZPTs do not accept uncertified raw materials. For safety, the machine must be turned off before attempting to measure the chain. After the system is shut down, the measurement process should be completed in accordance with safety procedures.
General spray oil has lubricating properties, but is not as good as other types of chain lubricants. These are typically used for rust protection and include antioxidant chemicals. Generally, they are inexpensive and widely available in retail stores. However, they have the disadvantage of being very penetrating and difficult to apply evenly. Oil cannot stay on the chain as it spins, which can accelerate wear and corrosion.
They can be used to speed up or slow down machines
Typically, roller chains are chains used to move mechanical system components. Unlike belts, roller chains can be used to speed up or slow down a machine. The main difference between belts and roller chains is the lubrication process. Belts use lubrication to help them move at a constant speed, but should not exceed the critical speed of the roller chain. This critical speed is not easy to determine and lubrication is critical to its life.
A roller chain is a chain consisting of a steel bushing that holds the inner plate A and pins C together. Pin C is riveted to outer link D, while roller R surrounds each bushing B. The teeth of the sprocket are supported on the rollers. They spin freely on pins and bushings, reducing friction.
The chains can be single-stranded, double-stranded, or multi-stranded. The rated power capacity of the single strand chain can meet various drive load requirements. Multi-strand chains provide higher power capacity without increasing chain pitch or line speed. The silent chain, also known as the inverted tooth chain, consists of a series of toothed chainplates. The pins of the chain are pressed into the wide ends of the sidebars and outer links.
Although roller chains are a common mechanical component, they can fail under certain conditions. The most common cause of excessive wear is wrong to load sizing. Each manufacturer sets a maximum workload for its product. A chain that is too small for the load carried will not run smoothly and may cause premature failure. Chains can also fail due to rust or improper maintenance.
There are many ways to choose the correct size roller chain. The easiest way to choose the right one is to use a horsepower chart to determine the speed of the motor. RPM will determine the size of the chain and the number of teeth on the drive sprocket. Conveyor chains offer a variety of options to move products horizontally or vertically, even around bend radii.
editor by czh 2022-12-29
China Xmas Light LED Light String Light Party Light Plastic Water Droplets Light Chain roller chain breaker tool
Item Description
Xmas mild LED Light string light party mild Plastic Drinking water Droplets Light Chain
obvious cable, 3xAAA clear B/O(batteries excluded)
water droplets: 1.8×1.8×7.5cm/personal computer, clear
spacing: 15.5cm
lead wire: 50cm
whole length: 220cm
packing:1pc in colour box
| Usage: | Landscaping, Home, Festival, Decoration |
|---|---|
| Certification: | CE |
| Power: | <6W |
| Emitting Color: | Warm White |
| Voltage: | 4.5V |
| IP Rating: | IP20 |
###
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) |
|---|
| Usage: | Landscaping, Home, Festival, Decoration |
|---|---|
| Certification: | CE |
| Power: | <6W |
| Emitting Color: | Warm White |
| Voltage: | 4.5V |
| IP Rating: | IP20 |
###
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) |
|---|
Pin chain conveyor
The choice between roller chains and friction drives depends on the usage environment. Roller chains are more resistant to dirty environments and are more suitable for conveying bulk products. The pivot chain is designed to handle highly bulk products. Ideally, the center-to-center distance between the two axles should be thirty to fifty times the chain pitch. The size of the sprocket will depend on the usage environment, which will also determine the fatigue strength and resistance of the chain.
Roller chains are more resistant to dirty environments
There are some key differences between drive chains and roller chains. The most notable difference is in the materials. Drive chains are generally more durable than roller chains. However, both chains are prone to dirty environments. While solution chains are sometimes used for heavy-duty tasks, roller chains are often used in dirtier environments. In fact, drive chains are often used when the job is very dirty and the chain has to slide on the rails.
The new lubricant used on the roller chain attracts dirt and other debris to the surface of the chain and prevents lubricant from entering the load-carrying parts of the chain, such as hinge plates, bushings, and rollers. When dust is drawn into these components, lubricants, and dirt form an abrasive paste that accelerates wear.
Lube-free roller chains keep chains clean longer. This makes it easier to specify and install in areas with strict hygiene requirements. CZPT lube-free roller chains meet NSF-H1 lubrication standards. However, lubricated roller chains are still suitable for areas where food contact is unlikely.
Stainless steel roller chains are particularly resistant to acids, alkalis, and low-temperature environments. Since stainless steel is softer than carbon steel, lubricants are not as effective at preventing dirt from entering the chain. Stainless steel roller chains have a higher strength rating than standard chains, but are not as strong as chains made from carbon steel. If you are using a roller chain in a very dirty environment, you should use a stainless steel chain.
A stud chain is more efficient than a friction drive
The present invention relates to a light-duty double-ended chain that is more efficient than conventional chains. Stud chains are made by die-forging bar steel into roughly the-shaped links. This method avoids loss of shear strength due to bending and also minimizes the welded portion. The double-headed chain is light in weight and has strong resistance to fatigue damage.
This chain type has a stud-style design. Stud-shaped design provides greater tensile strength and prevents tangling. Each stud is formed by die forging and is usually shaped like an e or th. However, it is not necessary for each stud to have a uniform cross-sectional shape. Different cross-sectional shapes can be used depending on the application.
Stud chains are more efficient than friction drives because the studs in the chain are integrated. Stud links resist large breaks. Its applications are in conveyor chains and fisheries. Wear tested on boat chains made of SBC material. In the process, bolt chains were found to be more efficient than friction drives. Its applications are rapidly expanding.
Double-ended chains are more efficient for high-load applications. It features studs throughout its internal width to prevent kinking. Chains of this type are commonly used for heavy lifting machinery. Other types of chains are roller chains, power transmission chains, and bushing roller chains. These types of chains are also widely used in motorcycle, bicycle and transportation applications. In addition to being more efficient, stud chains also have fewer wear problems than friction drive chains.
A study on the difference between wear percentage and friction time showed that stud chains are more efficient than friction drives. The friction strips were measured at the beginning of the test. Take it off after 6 hours, 10080 times, and take pictures with the same diameter. As a boundary value, the diameter of the friction strip is smaller than that of a conventional chain. This shows that the present invention has better wear resistance than friction drives.
Shaft chains designed for conveying bulk products
Pivot chains are versatile conveyors used in many applications. Low back type, small backrest distance, rear opening design to prevent the product from sticking to the joints and causing stiffness. Stainless steel and carbon bushing pin chains do not have pre-rotating rollers. In contrast, bucket elevators do not use pivot chains.
CZPT pin chains provide unmatched performance in agricultural and industrial machinery. They are constructed from a single cast barrel and are connected by hardened steel pins. CZPT’s steel pivot chains are strong enough to withstand the corrosive environments of agricultural and industrial applications. The steel pins in the CZPT Pintle Chain are hardened and riveted to ensure long-term durability and optimum performance.
Lifeguard chains feature patented interlocking side links that reduce gaps between adjacent side panels. They can withstand a variety of applications and will never break under pressure. These chains are available in 1/2” and 1” pitch configurations. CZPT combines both types of pin chains to achieve the best of both worlds. CZPT features dual pin chains and pin joints to increase chain durability and reduce maintenance hassles.
CZPT’s engineering team can custom design pivot chains for your specific application. Designed for specific speed, friction, temperature and wear requirements, these chains are ideal for a variety of applications. Headquartered in Milwaukee, Wisconsin, the company operates on two strategic platforms: Food and Beverage and Industrial Applications. The products of these companies are used in food, energy and manufacturing.
editor by czh 2022-11-28
China Roller chain and sprocket manufacturer Enclosed M900B250 Chain in Sukkur Pakistan PA66 Flexible Plastic Hydraulic Hose Cable Carrier Conveyor Belt Roller Forged Chain with ce certificate top quality low price
We – EPG Team the greatest Chain and agricultural gearbox manufacturing unit in China with 5 different branches.
Our goods are created by modern computerized equipment and gear.a specialised provider of a full selection of chains, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….Our The group is focused on producing all assortment of common roller chains and sprockets, gears & gearboxes, such as conveyor chain & sprockets , stainless metal chain, agricultural chain and has not just marketed its merchandise all over china, but also sold far more than sixty five% items to oversees, such as Europe, The usa, South-east Asia, and it also has established up storage logistics in areas like Europe. massive inventory ranges on zinc plated, solid steel shaft collars guarantee prompt satisfaction of any size prerequisite. Unplated, black-oxide and stainless metal sound collars are conveniently available. Black-oxide metal clamp type collars are in the same way stocked for unbeatable service. Mounted bearing and linear bearing orders are regularly delivered inside of 24 hours and our switch-about time on lower-to-duration linear shafting will exceed your anticipations. ISO 9001:2000 certified. Stocking distributor of electrical power transmission products like roller & several strand roller chains. Items also incorporate brakes, generate components, gears, torque limiters, U-joints, pulleys, sheaves, encoders, belt drives, clutches & motors are also available.
Company Profile
ZheJiang EPT EPT Technology Co., Ltd. is a extensive enterprise specializing in R&D, style, creation, and income in HangZhou, ZheJiang . It mainly generates all kinds of engineering drag chains, closed and semi-shut nylon drag chains, bridge drag chains, Mute drag chains, bolstered drag chains, conveyor chainplates, and a variety of equipment tool accessories have utilized for much more than 20 patents.
Since its institution, the company has often adhered to the enterprise services concept of “technological innovation, superb high quality, well timed support, commitment, and gratitude”, and constantly absorb new ideas in style, grasp new developments, strictly control good quality in process and creation, and have out right after-income All-spherical tracking provider, insi EPT on generating high-top quality merchandise, allow consumers take pleasure in the item-service method of “excellent good quality and excellent value, be concerned-cost-free all through the procedure”
The company has a complete generation method, R&D section, mould machining department, injection molding division, assembly department, good quality manage section, storage department, logistics section, etc., a strong R&D and mildew machining team, 3 senior engineers, and engineer assistants 5 and 7 experts. The creation group has practically 60 people, responding to client wants and inventory in a well timed way. With the craftsman spirit of excellence and higher-top quality solution principles, not only innovation but also progress. Serve customers with refined and higher-high quality items!
This merchandise is broadly utilised in numerous device tools, these kinds of as manipulators, robots, woodworking machinery, foods machinery, printing equipment, ceramic machinery, glass machinery, doorway and window equipment, various steel processing equipment, engraving and milling equipment, engraving devices, and so on. Different CNC machining facilities.
Crew Show
Main products
Applications
(1)Applies in the event exactly where reciprocating movement is utilised which has traction and protection to the developed-in cable, tubing, the trachea, and conduit, etc
(2) Drag chain has been commonly utilised in the numerical management device equipment, digital gear, stone device, glass machinery, the injection molding machine, robots, over weight transportation products, automatic warehouses, and so forth.
PA66 Cable Drag Chain Creation Approach
1.–Item Growth
two.–Mildew Layout–Mould Processing
three.–Injection Molding Semi-Completed Items
four.–Manual and Guide Assembly
5.–Item Tests
Certification Show
PAC EPT SHOW
HOW WE Perform
Are you a buying and selling organization or manufacturing facility?
A: We are a manufacturing unit.
How lengthy is your supply time?
Usually, it is 5-10 times if the merchandise are in stock. or it is 15-twenty days if the goods are not in stock, it is according to amount.
Do you offer samples? is it free or additional?
Of course, we could offer you the sample for cost-free demand but do not pay out the co EPT of freight.
What are your conditions of payment?
Least buy quantity: two hundred meters or much more than a thousand USD
Payment strategy: spend the entire volume for much less than 1500 USD orders,
35% in progress for much more than US$1500 orders, the stability requirements to be paid ahead of loading.
The use of authentic gear manufacturer’s (OEM) portion figures or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our firm and the shown substitution elements contained herein are not sponsored, accepted, or created by the OEM.
